Kiss "keep It Simple Stup**" Sep 15, 2016

OK, first thing to do is to consider the space, (including walls and doors) you are trying to condition. Envision the air flow between where the air will eventually come in and where it will be exhausted once you install the ductwork. Lastly, based on the inlet and exhaust locations, figure out where you want to position the unit you are going to use. Now there are lot's of installation tips an experienced professional can offer you while going through this process, but common sense and a... more

A Great Little Fan Sep 04, 2016

I bought this in-line fan to pump warm air into a chase containing hot and cold water pipes. When outdoor temperatures drop below 15 degrees Fahrenheit, the air in the chase falls below freezing, so I was worried that the pipes would freeze. This little fan together with flex duct (I stripped away the outer insulation) solved the problem. I have a thermostat in the chase and a control system that turns on the fan when the chase temperature drops below 40 degrees F. Now I can spend time... more

Thank You For Friendly Service Aug 20, 2016

Thank you, good product!

Best Inventment Ever! Aug 05, 2016

Our main house is cooled by a 2.5 ton conventional a/c. I replaced that unit in June with a new American Standard (Trane) a/c. On the back of the house is a Florida room 44' x 12' that was not air conditioned. Three sides of the room are sliding glass doors, circa 1989, overlooking a lake and facing east. The summer sun and Florida temperatures made the Florida room un-usable during the daylight hours. A load evaluation recommended a 3 ton unit to cool the Florida room. After much... more

Well Made Heater Mar 30, 2016

This heater was easy to install, it is made of high quality metal. Nice to have power connections on both sides of the heater and ample amount of heat.