Replacement For Cast Iron Radiator Sep 12, 2016

Easy install. Great customer service. Have not had cold weather to judge its effectiveness.

Owner, Custom Made Aug 25, 2016

I replaced a Dunkirk XEB-3 (20 yrs. old) with the Dunkirk boiler above. The new one is all most identical to the old one, that is the pipes were located same as the old, so gas and water lines were easily plumbed. The old electrical wires could be used although lengthened to connect to the digital controls. The circulators location has changed, it's still provided with its wiring provided. Venting is the same as the old one. I was happy to get another Dunkirk that installed easily.

Best Money I Spent Sep 16, 2016

I live in Canada ordered this, saved about $500. The service was great, shipping was fast. Installed easy, works great, best money we spent. Will order from EComfort again, Thanks.

So Far So Good Nov 11, 2016

Your illustrations for installation should be better. For example the rerouting of the condensation lines was not illustrated well. We figured it out but it took extra time. ....time is...? EVERYTHING!

Warmwire Heated Floor Feb 16, 2016

I installed a WarmWire heated floor in a 6'x8' coat room that had no other source of heat. It is on a concrete slab with 2 outside walls and a wall to an unheated attached garage. I glued 2 6mm thick sheets of Cerazorb synthetic cork directly on the concrete. It was super easy to lay the wire on top on the cork using the metal clip system provided. To be safe, I laid a sheet of 1/4" luan plywood on top of the wires while laying the tile. I checked the resistance in the wires at each step... more