It's A Trane Jul 12, 2016

Ameristar furnaces ARE the same as Trane and American standard furnaces (per trane tech support), except they don't have a painted finish. Even made in the same Trenton NJ factory. This furnace is about 40% cheaper here, on this site, than the same model in a Trane is from the local distributor.

A Great Little Fan Sep 05, 2016

I bought this in-line fan to pump warm air into a chase containing hot and cold water pipes. When outdoor temperatures drop below 15 degrees Fahrenheit, the air in the chase falls below freezing, so I was worried that the pipes would freeze. This little fan together with flex duct (I stripped away the outer insulation) solved the problem. I have a thermostat in the chase and a control system that turns on the fan when the chase temperature drops below 40 degrees F. Now I can spend time... more

Rocket Scientist Sep 05, 2016

Very nice fan!!

Love Is Fantech Aug 15, 2016

I used this inline fan to hook up to my vent hood in my kitchen. Even though this product was assembled in America, the motor was made in Germany and you certainly can't go wrong with German technology. I also brought LD10 silencer to attach directly to the fan and placed the silencer between the vent hood and the fan. I also purchased the FC10 clamp to hold the silencer and fan in place. I find the clamp itself was not good enough to hold fan and the silencer. To give me a piece of mind,... more

Owner, Custom Made Aug 06, 2016

I replaced a Dunkirk XEB-3 (20 yrs. old) with the Dunkirk boiler above. The new one is all most identical to the old one, that is the pipes were located same as the old, so gas and water lines were easily plumbed. The old electrical wires could be used although lengthened to connect to the digital controls. The circulators location has changed, it's still provided with its wiring provided. Venting is the same as the old one. I was happy to get another Dunkirk that installed easily.